Skip to content

Response, New York. Noah Park: Check Point Patches Actively Exploited Management Server Path Traversal. Detection, Dallas. Ava Okello: Report Finds Nearly Half of Deployed Detections Need Attention Before SOCs Can Trust Them.

SOCtember

Always First. Fast SOC News.

Screenshot of the SonicWall product advisory titled Retire Unsupported Gen 6 Firewalls, published November 18, 2026, with opening paragraphs telling customers to replace Gen 6 firewalls immediately and stop using them on the internet edge.
Image: SonicWall (fair use). The opening of SonicWall's Nov. 18 product advisory on Gen 6 firewalls.

Response

SonicWall Tells Customers to Pull Every Gen 6 Firewall Off the Internet Edge, Saying No Patch Will Come Even for a Critical Flaw and It Expects the Devices to Be Targeted

A product advisory published Nov. 18 says every Gen 6 and Gen 6.5 firewall running SonicOS 6.x, including virtual NSv units, is past end of support. SonicWall says it will make no exception for critical vulnerabilities and warns that each fix it ships for newer firewalls now points attackers at the older ones.

Noah Park, ResponseNew York5 min read

NEW YORK - SonicWall has told customers still running its Generation 6 firewalls to replace them immediately and to stop using them at the internet edge, warning that the devices will never receive another security fix and that it expects attackers to go after the ones still exposed.

In a product advisory published Nov. 18, the company said Gen 6 has reached end of support and that it "no longer releases firmware updates or security patches for Gen 6, whatever the severity of a newly found vulnerability, including Critical." A question-and-answer section at the bottom of the notice closes off the obvious appeal. Asked whether SonicWall will make an exception for a critical vulnerability, the company answers: "No."

"We expect internet-facing Gen 6 firewalls to be actively targeted," the advisory says. "Treat any Gen 6 firewall still in service as a high-risk exposure." It adds a line aimed at administrators who have kept old appliances running because they still pass traffic: "An end-of-life firewall that is still running is not a firewall that can still be secured."

Which devices are covered

The advisory applies to every Gen 6 and Gen 6.5 firewall running SonicOS 6.x, including Gen 6 NSv virtual firewalls. Its table, which SonicWall says follows its product life cycle dates, shows the last batch of models leaving support on Oct. 1, 2026: the TZ350, TZ350W, TZ500, TZ500W, SOHO 250 and SOHO 250W, the NSA 4600, 5600 and 6600, and the NSa 4650, 5650 and 6650.

Others went earlier. The TZ400, TZ400W, TZ600, TZ600P, NSA 3600 and NSa 3650 reached end of support on Aug. 1, 2026, the NSa 2650 on May 1, and the SOHO, SOHO W, TZ300P, NSa 9250, 9450 and 9650 and NSv 10 through NSv 1600 virtual appliances on April 16. The SuperMassive 9200 through 9800 and the NSsp 12800 and 12400 ended support on Feb. 20, 2026, the TZ300 and TZ300W in January 2025, and the NSA 2600 in March 2024. Support for Gen 6 "can no longer be purchased or renewed," the company said.

Screenshot of the Affected products table in SonicWall's Gen 6 advisory listing models such as TZ350, NSA 4600, NSa 4650, TZ400, NSa 3650, NSa 2650, SOHO and NSv 10 to NSv 1600, with their generation and end of support dates ranging from April 16, 2026 to October 1, 2026.
Image: SonicWall (fair use).Part of the advisory's table of Gen 6 and Gen 6.5 models and their end of support dates.

Why the old fleet becomes a map

The sharpest argument in the notice is about what happens after SonicWall patches its supported products. "Every fix is a map," the company wrote. "When a vulnerability affects several generations, supported firewalls receive a fix and Gen 6 does not. The public advisory then tells attackers where to look."

The timing makes the point concrete. On Nov. 6, SonicWall published a SonicOS security advisory for multiple high and medium severity vulnerabilities, with fixes in SonicOS 7.3.4 and 8.2.3. That notice is addressed to Gen 7 and Gen 8 firewalls. Under the new advisory, any Gen 6 unit that shares a flaw from a future bulletin of that kind will simply stay vulnerable. "Any new flaw, even a Critical one, stays open permanently on Gen 6," SonicWall wrote.

The company pointed to its own history. In 2024, it said, a critical SonicOS flaw, CVE-2024-40766, rated 9.3 on the CVSS scale, affected Gen 5, Gen 6 and early Gen 7 firewalls and was reported as exploited in the wild alongside ransomware activity against SSL VPN accounts. "Supported firewalls received a fix. A Gen 6 firewall would not today," the advisory says. The U.S. Cybersecurity and Infrastructure Security Agency added that flaw to its Known Exploited Vulnerabilities catalog in September 2024.

SonicWall framed the urgency with outside figures. Citing the Verizon 2025 Data Breach Investigations Report by way of Censys, it said edge devices and VPNs were the target in 22 percent of breaches that began with an exploited vulnerability, up from 3 percent a year earlier. Citing CSO Online, it said the median time from disclosure to confirmed exploitation fell from 120 days in 2025 to 80 days in the first half of 2026, and that 141 flaws were exploited from January to August 2026, more than in all of 2025. Attackers, it added, use automation and AI "to scan the internet for unsupported devices, analyze advisories and patches, and build working exploits faster."

Screenshot of the Why this is urgent section of SonicWall's Gen 6 advisory, with bullets on edge devices as a favorite way in, faster exploitation and AI-assisted attackers, followed by a numbered list including No patches, ever and Every fix is a map.
Image: SonicWall (fair use).The advisory's case for why Gen 6 is now an easy target.

What SonicWall wants done, and the stopgaps

The required actions are blunt. SonicWall says Gen 6 "should no longer be used in production" and asks customers to identify every Gen 6 firewall in their environment, "including spares and branch units," to prioritize units that are exposed to the internet or provide remote access through SSL VPN or WAN management, and to replace them with a Gen 8 firewall running SonicOS 8. It says supported settings can be migrated from SonicOS 6.5 with an in-product import or its NSM Migration App, so configurations do not have to be rebuilt.

For appliances that cannot be swapped out right away, the advisory lists interim steps, with a caveat: "These steps reduce exposure. They do not make an unsupported firewall secure." They are to disable WAN management, meaning HTTPS, SSH and SNMP on WAN interfaces; disable SSL VPN or restrict it to known source addresses; enforce multifactor authentication on every remaining remote-access and admin account and reset local passwords; disable unused services and interfaces; and monitor logs closely for unusual logins, configuration changes and traffic.

Screenshot of the Until a Gen 6 firewall is replaced section of SonicWall's advisory, listing steps to disable WAN management, disable or restrict SSL VPN, enforce multi-factor authentication and reset local passwords, disable unused services, and monitor logs.
Image: SonicWall (fair use).The interim steps SonicWall lists for Gen 6 units still in service.

What it means for security operations

For security operations teams, the notice changes the status of a familiar box in the rack. A Gen 6 appliance that has been patched on schedule until now is, by the vendor's own description, a standing exposure with no remediation path other than replacement. The inventory step SonicWall describes, which explicitly includes spares and branch office units, is the part most likely to be incomplete in practice, since edge devices bought for small sites often sit outside central asset management.

The log monitoring step also falls to the SOC rather than to the network team that owns the hardware. SonicWall does not publish detection content in the advisory. Its instruction is to watch for unusual logins, configuration changes and traffic, which in practice means making sure firewall authentication and administration events from remaining Gen 6 units actually reach the SIEM, and treating new admin sessions, VPN logins from unfamiliar sources or unexpected rule changes on those devices as incidents worth triage rather than noise.

"A compromised perimeter firewall gives attackers a foothold for credential theft, lateral movement and ransomware deployment," the company wrote. "The risk to an unsupported firewall grows every day it stays online."

About the Author

Noah Park

Noah Park covers incident response, identity compromise, and blue-team operations for SOCtember from New York.

Related stories

Response desk